Truck and High Volume
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety and reliability.

Husky VIIIS Cold Weather:
High Volume Pressure Activated Automatic Nozzle
Pressure activated nozzle for unattended self-service and unattended stations.
nozzle cold weather truck high volume husky

Loss motion latch pin, working in conjunction with the spring loaded diaphragm, greatly reduces clicking off & splash back spills.
Pressure activated feature allows nozzle to be installed at self-service, full-service and unattended stations.
Spout bushing secures spout spring and prevents spout from rounding in during service.
Flo-Stop® device shuts off nozzle if it falls from fill neck or when raised above horizontal.
Delrin tipped stem reduces lever pad wear & allows proper low flow shut off.
Torsion clip spring enhances lever durability.
Dual poppet design for easier opening of nozzle when high system pressure is present.

  • VIIIS Nozzle shuts off when:
    — the pump shuts off.
    — the gas tank is full.
    — the lever is opened before the pump is turned on.
    — the leak detector has not completed the test cycle.
  • Equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
  • Contains a poppet disc seal, rated at -40° F/C, to prevent fuel leakage from the main seal in extreme cold weather.
  • Spout is reinforced with a thick aluminum bushing that holds the spout spring in place and keeps the spout from rounding in – the two leading causes of clicking-off and splash-back spillage.
  • Comes standard with Full Grip Nozzle Guard and Waffle Splash Guard.
Construction
Body Aluminum
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon
Lever One piece contoured steel with hard plastic cover
Inlet 1″ / 25.4 mm NPTF

Click image to view product numbers and specs:

Designed To Fit Husky VIIIS Cold Weather Nozzles:

Model No. Description
2276 1″ F x 1″ F Reconnectable Safe-T-Break®
5812 1″ F x 1″ F Non-Reconnectable Safe-T-Break®
6301 1″ F x 1″ F Non-Reconnectable PCC Safe-T-Break®
5231 1″ F x 1″ F Low Pull Reconnectable Safe-T-Break®

Designed To Fit Husky VIII Cold Weather Nozzles:

Model No. Description
0087 1″ M x 1″ F Multi-Plane Swivel
4860 1″ M x 1″ F Multi-Plane High Volume Swivel
0095 1″ M x 1″ F Multi-Plane 70° Pump Swivel
3395 1″ M x 1″ F Multi-Plane Restricted Swivel

Designed To Fit Husky VIIIS Nozzles:

Model No. Description
4620 2″ Slip-On Pressure Vacuum Vent
4885 2″ Thread-On Pressure Vacuum Vent – NPTF
5885 2″ Thread-On Pressure Vacuum Vent with Internal Screen – NPT

Designed To Fit Husky VIII Cold Weather Nozzles:

Model No. Description
5969 1″ M Multi-Plane Swivel connected to 1″ F Reconnectable Safe-T-Break®

Designed To Fit Husky VIII Cold Weather Nozzles:

Model No. Description
4740 Full Grip Guard
5516 Full Grip Reguard
5494 Lever Guard
1808 Waffle Splash Guard
8178 POPD® EZH Guard
8177 POPD® EZS Guard
7999 POPD® H Clear Cover
8168 POPD® H Mate Guard
8186 POPD® H Full Grip Guard
8193 POPD® H Full Grip Reguard
6628 POPD® S Clear Cover
7352 POPD® S Full Grip Guard
8167 POPD® S Mate Guard
8194 POPD® S Full Grip Reguard

Designed To Fit Husky VIII Cold Weather Nozzles:

Model No. Description
2279 Complete Spout Assembly Kit with Bushing
5017 Complete Spout Assembly Kit without Bushing
3589 Complete Long Spout Assembly with Spout Bushing
11043 Complete Spout Assembly without Spout Bushing and Small Spout Spring

Designed To Fit Husky VIII Cold Weather Nozzles:

Model No. Description
7089 Nozzle Service Kit
3593 Hold Open Clip Kit
6645 Plunger Assembly Lift Tool

Click here to view full catalog page

Model No. Description Shipping Weight Lbs (Kg)
New Nozzles
651910 with Spout Bushing, Three Notch Hold Open Clip and Waffle Splash Guard 4.6 (2.0)
652110 without Spout Bushing, with Three Notch Hold Open Clip and Waffle Splash Guard 4.5 (2.0)
CONSTRUCTION
Body Aluminum
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon
Lever One piece contoured steel with hard plastic cover
Inlet 1″ / 25.4 mm NPTF