Conventional Nozzles
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety, and reliability.

Safe-T-Squeeze®: Automatic Nozzle Automatic shut-off conventional nozzle equipped with a mechanical interlock that shuts off the nozzle if it falls from the fill tank.
nozzle safe-t-squeeze conventional husky

StreamShaper® reduces turbulence and velocity for better ORVR compatibility – straighter fuel flow and less splash back spillage.

  • Unique internal interlock device that shuts off the fuel flow before the spout is out of the tank.
  • Aluminum casting with high impact polymer hand guard provides a lightweight, easier to handle conventional nozzle.
  • 2-piece lever is easier to use:
    — wider and smoother.
    — requires ½ the force to open nozzle.
    — protective cover is riveted so will not slide.
  • A reinforced stainless steel spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • Drip Less spout reduces/eliminates drips from spout.
  • StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
  • Lightest insertion “force” of any bellow operated nozzle.
  • Easy and inexpensive to maintain due to the one-piece bellow.
  • Bellow face seal has “vents” to prevent splash back spillage.
  • Comes standard with smooth full grip guard.
Construction
Body One piece die cast aluminum
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever Two piece steel with high impact polymer cover
Inlet ¾” / 19.1 mm NPT

Click image to view product numbers and specs:

Designed to Fit Husky Safe-T-Squeeze® Nozzles:

Model No. Description
002273 ¾” F x ¾” F NPT Non-Reconnectable Safe-T-Break®
003360 ¾” F x ¾” F NPT Reconnectable Safe-T-Break®
005230 ¾” F x ¾” F NPT Low Pull Reconnectable
006130 ¾” F x ¾” F NPT Non-Reconnectable PCC Safe-T-Break®
227374 ¾” F x ¾” F NPT Non-Reconnectable Safe-T-Break® with ¾” M x ¾” M Whip Hose
227375 ¾” F x ¾” F NPT Non-Reconnectable Safe-T-Break® with ¾” M x ¾” M Whip Hose with Swivel Nut
336074 ¾” F x ¾” F NPT Reconnectable Safe-T-Break® with ¾” M x ¾” M Whip Hose
336075 ¾” F x ¾” F NPT Reconnectable Safe-T-Break® with ¾” M x ¾” M Whip Hose with Swivel Nut

Designed to Fit Husky Safe-T-Squeeze® Nozzles:

Model No. Description
000350 ¾” M x ¾” F NPT Multi-Plane Swivel
000355 ¾” M x ¾” F NPT Multi-Plane Swivel Anodized Black
002272 ¾” M x ¾” F NPT 90° Pump Swivel
002950 ¾” M x ¾” F NPT Multi-Plane Restricted Swivel

Designed to Fit Husky Safe-T-Squeeze® Nozzles:

Model No. Description
006310 ¾” M NPT Multi-Plane Swivel connected to ¾” F NPT Reconnectable Safe-T-Break®

Designed to Fit Husky Safe-T-Squeeze® Nozzles:

Model No. Description
006483 Full Grip Guard (includes Bellow and Slider Clamps)

Designed to Fit Husky Safe-T-Squeeze® Nozzles:

Model No. Description
006648 Complete Unleaded Spout Assembly Kit
007380 Complete Unleaded Drip Less Spout
Assembly Kit
006651 Unleaded Spout Assembly
007385 Unleaded Drip Less Spout Assembly

Designed to Fit Husky Safe-T-Squeeze® Nozzles:

Model No. Description
004490 Conventional Flo-Equalizer® – 10 gpm / 37.9 Lpm
007490 Internal Flo-Equalizer® – 10 gpm / 37.9 Lpm

Designed to Fit Husky Safe-T-Squeeze® Nozzles:

Model No. Description
4620 2″ Slip-On Pressure Vacuum Vent
004885 2″ Thread-On Pressure Vacuum Vent – NPT
005885 2″ Thread-On Pressure Vacuum Vent with Internal Screen – NPT

Designed to Fit Husky Safe-T-Squeeze® Nozzles:

Model No. Description
005934 Bellows Clamp
007377 Collar Assembly
006649 Complete Bellows Assembly Kit
003593 Hold Open Clip Kit
007089 Nozzle Service Kit
006497 Oetiker Clamp Tool
007381 Slider Assembly
005920 Slider Clamp
000397 Unleaded Spout Gauge

Click here to view full catalog page

Model No. Description Shipping Weight Lbs (Kg)
New Unleaded Nozzles
602504 with Two Notch Hold Open Clip 3.6 (1.6)
602582 with Two Notch Hold Open Clip and Drip Less Spout 3.6 (1.6)
Construction
Body One piece die cast aluminum
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever Two piece steel with high impact polymer cover
Inlet ¾” / 19.1 mm NPT