Ethanol Fueling
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety and reliability.

Husky® X E25: Automatic Nozzle Automatic shut-off nozzle for full-service and self-service stations.
nozzle X standard conventional husky

Loss motion latch pin, working in conjunction with the spring loaded diaphragm, greatly reduces clicking off & splash back spills.
Unique Flo-Stop® device shuts off when spout is raised above horizontal or falls from the fill pipe.
Delrin tipped stem reduces lever pad wear & allows more positive low flow shut off.
StreamShaper® reduces turbulence & velocity for better ORVR compatibility – straighter fuel flow & less splash back spillage.

  • StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
  • Compatible with unleaded and all Ethanol blends through E-25.
  • A reinforced stainless steel spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
  • Husky® X nozzle shut-off when the gas tank is full.
  • Nozzle comes with smooth full grip guard.
  • All seals are UL approved fluorocarbon compounds to prevent deterioration from Ethanol blends.
  • New poppet seal design improves flow control and provides enhanced endurance over time.
Construction
Body One piece die cast aluminum
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever One piece contoured polymer
Inlet ¾” / 19 mm NPT

Click image to view product numbers and specs:

Designed To Fit Husky® X E25 Nozzles:

Model No. Description
006360^ ¾” F x ¾” F Reconnectable E25 Safe-T-Break®
006273 ¾” F x ¾” F Non-Reconnectable E25/E85 Safe-T-Break®
^NOT LISTED

Designed To Fit Husky® X E25 Nozzles:

Model No. Description
003376 Black Handle Guard
004145 Full Grip Guard
001806 Full Grip Reguard
005494 Lever Guard
003795 Mate Guard
003440 Mate Easy-On Package
006628 POPD® Clear Cover
006665 POPD® Full Grip Guard
007205 POPD® Full Grip Reguard
007815 POPD® Mate Guard
001506 Protection Package
001809 Reguard Protection Package
001808 Waffle Splash Guard

Designed To Fit Husky® X E25 Nozzles:

Model No. Description
011100 Unleaded E25 Spout Assembly

Designed To Fit Husky® X E25 Nozzles:

Model No. Description
004620 2″ Slip-On Pressure Vacuum Vent
004885 2″ Thread-On Pressure Vacuum Vent – NPT
005885 2″ Thread-On Pressure Vacuum Vent with Internal Screen – NPT

Designed To Fit Husky® X E25 Nozzles:

Model No. Description
003593 Hold Open Clip Kit
007089 Nozzle Service Kit
000397 Unleaded Spout Gauge

Click here to view full catalog page

Model No. Description Shipping Weight Lbs (Kg)
New Unleaded Nozzle
1108059N^ with Three Notch Hold Open Clip and Waffle Splash Guard 3.0 (1.2)
^NOT LISTED
Construction
Body One piece die cast aluminum
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever One piece contoured polymer
Inlet ¾” / 19 mm NPT