
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety and reliability.
Husky® XS® E85:
Pressure Activated Automatic Nozzle Pressure activated, automatic shut-off nozzle for full-service, self-service and unattended stations.
Pressure Activated Automatic Nozzle Pressure activated, automatic shut-off nozzle for full-service, self-service and unattended stations.









One piece, all metal casting, designed for structural integrity.
Loss motion latch pin, working in conjunction with the spring loaded diaphragm, greatly reduces clicking off and splash back spills.
Unique Flo-Stop® device shuts off nozzle when spout is raised above horizontal or falls from fill pipe.
Nickel plated components and fuel path (.0004-.0007 thickness) for corrosion resistance from high ethanol fuels.
Stainless steel reinforced spout bushing keeps the spout tip round.
Delrin-Tipped stem reduces lever pad wear & allows a more positive low flow shut off.
Torsion clip spring enhances lever durability – no more breaking.
StreamShaper® reduces turbulence & velocity for better ORVR compatibility – straighter fuel flow & less splash back spillage.

- Husky® XS® E85 nozzle shuts off:
— when the pump shuts off.
— when the gas tank is full.
— when the lever is opened before the pump is turned on.
— when the leak detector has not completed its test cycle. - Aluminum body, spout, and internal parts are nickel plated to prevent contamination and corrosion from Ethanol blends.
- StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
- Compatible with unleaded and all Ethanol blends through E-85.
- Nozzle comes with smooth full grip guard
- A reinforced stainless steel spout bushing keeps the spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
- Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
- All seals are UL approved fluorocarbon compounds to prevent deterioration from Ethanol blends.
- New poppet seal design improves flow control and provides enhanced endurance over time.
Construction | |
---|---|
Body | One-piece die cast aluminum with Electroless Nickel Plating |
Seals | Fluorocarbon |
Packing | Double o-ring seal protected by fiber reinforced Teflon® |
Lever | One piece contoured steel with hard plastic cover |
Inlet | ¾” / 19 mm NPT |
