Vapor Recovery
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety and reliability.

Husky® V34iA Double Poppet:
Automatic Shut-Off Vacuum Assist Nozzle
Automatic shut-off, vacuum assist nozzle for full-service, self-service and unattended stations.
nozzle vapor recovery double poppet vacuum assist v34ia husky

One piece, all metal, casting design for structural integrity.
Loss motion latch pin, working in conjunction with the spring loaded diaphragm, greatly reduces clicking off and splash back spills.
Robust vapor valve configuration eliminates “limp lever” and anodized aluminum parts to prevent corrosion.
Anodized aluminum parts prevent corrosion.
Stainless steel reinforced spout bushing keeps the spout tip round.
Delrin-Tipped stem reduces lever pad wear and allows a more positive low flow shut off.
Torsion clip spring enhances lever durability – no more breaking.
StreamShaper® reduces turbulence and velocity for better ORVR compatibility – straighter fuel flow & less splash back spillage.
Double poppet for precise, slow-flow, to-the-penny dispensing.

  • Husky® V34iA nozzle shuts off when the gas tank is full.
  • Strong vapor valve in the nozzle that is mechanically operated by the on-off action of the nozzle’s lever.
  • StreamShaper® reduces turbulence for straighter flow and less splash back spillage.
  • Nozzle is equipped with a double poppet for precise, slow-flow, to-the-penny dispensing.
  • Husky® vapor return line is an internal part of the body casting, thus eliminating potential vapor leak points and fugitive evaporative emissions from the fuel remaining in the vapor path of the hose.
  • Uses conventional spout with spout ring and soft vapor escape guard.
  • Vapor assist is achieved at the body end of the spout where a vapor ring captures emissions.
  • Nozzle spout is covered by a one year warranty.
Construction
Body Aluminum
Seals Fluorocarbon
Packing Double O-Ring Seal Protected by Fiber Reinforced Teflon®
Lever One-Piece Contoured Steel with Hard Plastic Cover
Inlet M34 x 1.5

Click image to view product numbers and specs:

Designed To Fit Husky® V34iA Double Poppet Nozzles:

Model No. Description
004034 Reconnectable Safe-T-Break®
004034A Reconnectable Safe-T-Break® – Atex
006210 Non-Reconnectable Safe-T-Break®
005134A Non-Reconnectable Safe-T-Break® – Atex
010513 Non-Reconnectable Safe-T-Break® – Shearpin

Designed To Fit Husky® V34iA Double Poppet Nozzles:

Model No. Description
004605 Inverted Vapor Assist Swivel

Designed To Fit Husky® V34iA Double Poppet Nozzles:

Model No. Description
004620 2″ Slip-On Pressure Vacuum Vent
004885 2″ Thread-On Pressure Vacuum Vent – NPT
005885 2″ Thread-On Pressure Vacuum Vent with internal screen – NPT

Designed To Fit Husky® V34iA Double Poppet Nozzles:

Model No. Description
006951 Full Grip Guard
004231 Full Grip Reguard
005494 Lever Guard
007999 POPD® H Clear Cover
008184 POPD® H Full Grip Guard
008191 POPD® H Full Grip Reguard
006628 POPD® S Clear Cover
006660 POPD® S Full Grip Guard
007220 POPD® S Full Grip Reguard

Designed To Fit Husky® V34iA Double Poppet Nozzles:

Model No. Description
005837 Vapor Assist Flo-Equalizer®

Designed To Fit Husky® V34iA Double Poppet Nozzles:

Model No. Description
007089 Nozzle Service Kit
003593 Hold Open Clip Kit
005233 O-Ring Replacement Kit
000397 Unleaded Spout Gauge

Click here to view full catalog page

Model No. Description Shipping Weight Lbs (Kg)
NEW UNLEADED NOZZLES
7320041N^ with High-Flow Double Poppet and Two Notch Hold Open Clip 4.0 (1.8)
7320081N^ with High-Flow Double Poppet, without Hold Open Clip 4.0 (1.8)
^NOT LISTED
Construction
Body Aluminum
Seals Fluorocarbon
Packing Double O-ring Seal Protected by Fiber Reinforced Teflon®
Lever One-Piece Contoured Steel with Hard Plastic Cover
Inlet M34 x 1.5