Vapor Recovery
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety and reliability.

Husky® V34SK Double Poppet:
Sightglass Nozzle
Pressure activated, automatic shut-off vacuum assist nozzle for full-service, self-service and unattended stations.
nozzle vapor recovery double poppet vacuum assist v34sk husky

One piece, all metal, casting design for structural integrity.
Loss motion latch pin, working in conjunction with the spring loaded diaphragm, greatly reduces clicking off and splash back spills.
Robust vapor valve configuration eliminates “limp lever” and anodized aluminum parts to prevent corrosion.
Unique Flo-Stop® device shuts off when the spout is raised above horizontal or falls from the fill pipe.
Stainless steel reinforced spout bushing keeps the spout tip round.
Delrin-Tipped stem reduces lever pad wear & allows a more positive low flow shut-off.
Torsion clip spring enhances lever durability – no more breaking.
StreamShaper® reduces turbulence & velocity for better ORVR compatibility – straighter fuel flow and less splash back spillage.

  • Husky® V34SK nozzle shuts off when:
    — the pump shuts off.
    — the gas tank is full.
    — the lever is opened before the pump is turned on.
    — the leak detector has not completed the test cycle.
  • Strong vapor valve in the nozzle that is mechanically operated by the on-off action of the nozzle’s lever.
  • Nozzles are equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
  • Sightglass on nozzle allows customer to see fuel flow through nozzle.
  • StreamShaper® reduces turbulence for straighter flow and less splash back spillage.
  • Nozzle is equipped with a double poppet for precise, slow-flow, to-the-penny dispensing.
  • Husky® vapor return line is an internal part of the body casting, thus eliminating potential vapor leak points and fugitive evaporative emissions from the fuel remaining in the vapor path of the hose.
  • Uses conventional spout with spout ring and soft vapor escape guard.
  • Vapor assist is achieved at the body end of the spout where a vapor ring captures emissions.
Construction
Body Aluminum w/reinforced polymer handguard
Seals Fluorocarbon
Packing Fiber Reinforced Teflon®
Lever One-Piece Contoured Steel with Hard Plastic Cover
Inlet 1¼” – 18

Click image to view product numbers and specs:

Designed To Fit Husky® V34SK Double Poppet Nozzles:

Model No. Description
006560 Reconnectable ORVR Safe-T-Break®

Designed To Fit Husky® V34SK Double Poppet Nozzles:

Model No. Description
004620 2″ Slip-On Pressure Vacuum Vent
004885 2″ Thread-On Pressure Vacuum Vent – NPT
005885 2″ Thread-On Pressure Vacuum Vent with internal screen – NPT

Designed To Fit Husky® V34SK Double Poppet Nozzles:

Model No. Description
012115 Complete V34SK Spout Assembly Kit – Unleaded

Designed To Fit Husky® V34SK Double Poppet Nozzles:

Model No. Description
006951 Full Grip Guard
004231 Full Grip Reguard
005494 Lever Guard
007999 POPD® H Clear Cover
008184 POPD® H Full Grip Guard
008191 POPD® H Full Grip Reguard
006628 POPD® S Clear Cover
006660 POPD® S Full Grip Guard
007220 POPD® S Full Grip Reguard

Designed To Fit Husky® V34SK Double Poppet Nozzles:

Model No. Description
003593 Hold Open Clip Kit
007089 Nozzle Service Kit
005233 O-Ring Kit
000397 Unleaded Spout Gauge
012113 Vapor Splash Guard Clamp
012118 V34SK A/L Spout Adaptor
012114 V34SK Vapor Splash Guard (VSG) with Clamp

Currently not available.

Click here to view full catalog page

Model No. Description Shipping Weight Lbs (Kg)
New Unleaded Nozzles
E12111170N^ with High Flow Double Poppet and Two Notch Hold Open Clip 4.0 (1.8)
^NOT LISTED
Construction
Body Aluminum w/reinforced polymer handguard
Seals Fluorocarbon
Packing Fiber Reinforced Teflon®
Lever One-Piece Contoured Steel with Hard Plastic Cover
Inlet 1¼” – 18