XS® Nozzle

Home | Husky | Nozzles | XS® Nozzle

#1108459: Conventional, Pressure Activated

XS® Nozzle

3/4" Unleaded Cold Weather Nozzle with Three Notch Hold Open Clip and Waffle Splash Guard

Product Info

Resources

Specs / Construction

Pressure activated, automatic shut-off nozzle for full-service and self-service stations.

Features/Benefits

Husky XS® nozzle shuts off when: the pump shuts off, the gas tank is full, the lever is opened before the pump is turned on, or the leak detector has not completed its test cycle.
Stainless steel spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
Comes standard with smooth full grip guard.
Compatible with unleaded and all Ethanol blends through E-25.
All seals are UL approved fluorocarbon compounds to prevent deterioration from Ethanol blends.
New poppet seal design in conjunction with new tilt poppet design improves flow control (“to-the-penny” dispensing) and provides enhanced endurance over time.
Contains a poppet seal rated at -40° F/C to prevent fuel leakage from the main seal in extreme cold weather.

Installation PDFs

009221

Construction

Body: One piece die cast aluminum
Seals: Fluorocarbon
Packing: Double o-ring seal protected by fiber reinforced Teflon®
Lever: One piece contoured polymer
Inlet: ¾” / 19 mm NPT

Flow Rate

Dimensions

Configure a Complete Fueling System

Choose any options that are applicable. If you would prefer a complete pump-to-car hanging hardware assembly that is certified, pre-assembled, pressure and continuity tested hanging hardware, select the “Make it an EZ-Connect®” tab to configure your EZ-Connect®.

Add Accessories / Options

Make it an EZ-Connect®

Choose a Safe-T-Break®

Choose …

006360: ¾” F x ¾” F Reconnectable E25 Safe-T-Break®, Not Listed

006273: ¾” F x ¾” F Non-Reconnectable E25/E85 Safe-T-Break®

Choose Spout

Choose …

011110: Unleaded E25 Spout Assembly

Choose Pressure/Vacuum Vent

Choose …

Choose Accessories, Testing and Maintenance

Choose …

003593: Hold Open Clip Kit

004951: Spout Nut

000385: 1” M x ¾” F Reducer Bushing

Choose Guards

Choose …

003376: Black Handle Guard

004145: Full Grip Guard

001806: Full Grip Reguard

005494: Lever Guard

003440: Mate Easy-on Package

003795: Mate Guard

006628: POPD® S Clear Cover

006665: POPD® S Full Grip Guard

007205: POPD® S Full Grip Reguard

007815: POPD® Mate Guard

001506: Protection Package

001809: Reguard Protection Package

001808: Waffle Splash Guard

Please contact your distributor for information on creating an EZ-Connect for this nozzle.

EZ-Connects for this product have not been configured.

Ready to exceed expectations? Find the nearest distributor to get started.

Mega Menu Contact

Join Our List