TECHNICAL INFORMATION

Bulletins and Certificates


Technical Bulletin


Husky Vapor Recovery Balance Nozzle Troubleshooting Guide

Caution: Do not top off! Topping off can lead to spills, splashes and blocking of the vapor hose.

Problem Solution
Nozzle keeps shutting off.

1.Drain gasoline from vapor hose into vehicle fill pipe or an approved container by compressing bellows and raising hose above nozzle. Do not squeeze lever.

2. Slow down fuel delivery. Put on low or middle notch.

Nozzle won’t pump.

1.Insert nozzle farther in vehicle fill pipe. Bellow must be compressed 1/2″.

2. Drain gasoline from vapor hose into vehicle fill pipe or an approved container by compressing bellows and raising hose above nozzle. Do not squeeze lever.

Nozzle won’t shut off.

1.Check fuel system for debris.

2. Replace nozzle immediately.

Torn bellows or face plate.

Replace bellows.

Nozzle leaks.

1. Check inner hose for leaks.

2. Replace nozzle immediately.