Conventional Nozzles
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety, and reliability.

Husky® 1AS: Automatic Nozzle Pressure activated, automatic shut-off nozzle with metal hand guard for full-service and self-service stations.
nozzle commercial 1as husky

Loss motion latch pin, working in conjunction with the spring loaded diaphragm, greatly reduces clicking off and splash back spills.
Unique Flo-Stop® device shuts off when spout is raised above horizontal or falls from the fill pipe.
Delrin tipped stem reduces lever pad wear and allows more positive low flow shut off.
Stream Shaper® reduces turbulence and velocity for better ORVR compatibility – straighter fuel flow and less splash back spillage.

  • 1AS nozzle shuts off when:
    – the pump shuts off.
    – the gas tank is full.
    – the lever is opened before the pump is turned on.
    – the leak detector has not completed the test cycle.
  • Stainless steel reinforced spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tanke or raises above the horizontal.
  • Stream Shaper® reduces turbulence for straighter fuel flow and less splash back spillage.
  • Comes standard with smooth full grip guard.
Construction
Body Die cast aluminum body with metal hand guard
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever One piece contoured steel with hard plastic cover
Inlet 1″ / 25.4 mm NPT and BSPP

Click image to view product numbers and specs:

Designed To Fit Husky® 1AS Nozzles:

Model No. Description
002276 1″ F x 1″ F NPT Reconnectable Safe-T-Break®
005812 1″ F x 1″ F NPT Non-Reconnectable Safe-T-Break®
006301 1″ F x 1″ F NPT Non-Reconnectable PCC Safe-T-Break®
005231 1″ F x 1″ F NPT Low Pull Reconnectable Safe-T-Break®
003076 1″ F x 1″ F BSPP Reconnectable Safe-T-Break®
003076A 1″ F x 1″ F BSPP Reconnectable Safe-T-Break® – Atex
006914 1″ F x 1″ F BSPP Non-Reconnectable Safe-T-Break®

Designed To Fit Husky® 1AS Nozzles:

Model No. Description
000087 1″ M x 1″ F NPT Multi-Plane Swivel
004860 1″ M x 1″ F NPT Multi-Plane High Flow Swivel
000095 1″ M x 1″ F NPT 70° Pump Swivel
003395 1″ M x 1″ F NPT Multi-Plane Restricted Swivel
000352 1″ M x ¾” F NPT Multi-Plane Swivel
000356 1″ M x ¾” F NPT Multi-Plane Swivel Anodized Black
003306 1″ M x 1″ F BSPP Multi-Plane Swivel
003306A 1″ M x 1″ F BSPP Multi-Plane Swivel – Atex
006949 1″ M x 1″ F BSPP Multi-Plane High Flow Swivel

Designed To Fit Husky® 1AS Nozzles:

Model No. Description
005969 1″ M NPT Multi-Plane Swivel connected to 1″ F NPT Reconnectable Safe-T-Break®
008015 1″ M BSPP Multi-Plane Swivel connected to 1″ F BSPP Reconnectable Safe-T-Break®
008015A 1″ M BSPP Multi-Plane Swivel connected to 1″ F BSPP Reconnectable Safe-T-Break®
Atex

Designed To Fit Husky® 1AS Nozzles:

Model No. Description
000554 Full Grip Guard
001804 Full Grip Reguard
005494 Lever Guard
003376 Mate Handle Guard
000226 Mate Guard
008180 POPD® EZH Nozzle Guard
008179 POPD® EZS Nozzle Guard
007999 POPD® H Clear Cover
008170 POPD® H Mate Guard
008183 POPD® H Full Grip Guard
008190 POPD® H Full Grip Reguard
006628 POPD® S Clear Cover
006655 POPD® S Full Grip Guard
007210 POPD® S Full Grip Reguard
008169 POPD® S Mate Guard
000099 Protection Package
001811 Reguard Protection Package
001808 Waffle Splash Guard

Designed To Fit Husky® 1AS Nozzles:

Model No. Description
001473 Unleaded Spout without Flo-Stop®
010434 Unleaded Long Spout without Flo-Stop®
001471 Light Duty Diesel Spout without Flo-Stop®
010353 Light Duty Diesel Long Spout without Flo-Stop®
008862 Light Duty Diesel Spout without Flo-Stop® with
StreamShaper®

Designed To Fit Husky® 1AS Nozzles:

Model No. Description
004620 2″ Slip-On Pressure Vacuum Vent
004885 2″ Thread-On Pressure Vacuum Vent – NPT
005885 2″ Thread-On Pressure Vacuum Vent with Internal Screen – NPT

Designed To Fit Husky® 1AS Nozzles:

Model No. Description
007089 Nozzle Service Kit
003593 Hold Open Clip Kit
000397 Unleaded Spout Gauge
000385 1″ M x ¾” F Reducer Bushing – NPT

Click here to view full catalog page

Model No. Description Shipping Weight Lbs (Kg)
New Unleaded Nozzles with NPT
1216204 with Three Notch Hold Open Clip 3.3 (1.4)
New Light Duty Diesel Nozzles with NPT
1216203 with Three Notch Hold Open Clip 3.4 (1.5)
CONSTRUCTION
Body Die cast aluminum body with metal hand guard
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever One piece contoured steel with hard plastic cover
Inlet 1″ / 25.4 mm NPT and BSPP