Conventional Nozzles
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety, and reliability.

Husky® Enhanced Conventional: Eco Nozzle Automatic shut-off conventional nozzle equipped with a mechanical interlock that shuts off the nozzle if it falls from the fill tank.
nozzle commercial eco husky

Stream Shaper® reduces turbulence and velocity for better ORVR compatibility – straighter fuel flow and less splash back spillage.

  • Unique internal interlock device that shuts off the fuel flow before the spout is out of the tank.
  • Aluminum casting with high impact polymer hand guard provides a lightweight, easier to handle conventional nozzle.
  • Two-piece lever is easier to use:
    – requires half the force to open nozzle.
    – ADA compliant.
  • A reinforced stainless steel spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • Drip Less spout reduces/eliminates drips from spout.
  • Stream Shaper® reduces turbulence for straighter fuel flow and less splash back spillage.
  • Lightest insertion “force” of any safety interlock operated nozzle.
  • Comes standard with smooth full grip guard.
  • CARB compliant for drips, spills, spitting and liquid retention.
  • Unique tilt poppet maximizes “to-the-penny” dispensing.
Construction
Body One-piece die cast aluminum
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever Two-piece high impact polymer
Inlet ¾” / 19.1 mm NPT

Click image to view product numbers and specs:

Designed To Fit Husky® Eco Nozzles:

Model No. Description
002273 ¾” F x ¾” F NPT Non-Reconnectable Safe-T-Break®
003360 ¾” F x ¾” F NPT Reconnectable Safe-T-Break®
005230 ¾” F x ¾” F NPT Low Pull Reconnectable Safe-T-Break®
006130 ¾” F x ¾” F NPT Non-Reconnectable PCC Safe-T-Break®
008330 ¾” F x ¾” F NPT Reconnectable MagBreak®

Designed To Fit Husky® Eco Nozzles:

Model No. Description
000350 ¾” M x ¾” F NPT Multi-Plane Swivel
000355 ¾” M x ¾” F NPT Multi-Plane Swivel Anodized Black
002272 ¾” M x ¾” F NPT 90° Pump Swivel
002950 ¾” M x ¾” F NPT Multi-Plane Restricted Swivel

Designed To Fit Husky® Eco Nozzles:

Model No. Description
006310 ¾” M NPT Multi-Plane Swivel connected to ¾” F NPT Reconnectable
Safe-T-Break®

Designed To Fit Husky® Eco Nozzles:

Model No. Description
014034 Full Grip Nozzle Guard

Designed To Fit Husky® Eco Nozzles:

Model No. Description
004490 Conventional Flo-Stop® – 10 gpm / 37.9 Lpm
007490 Internal Flo-Stop® – 10 gpm / 37.9 Lpm

Designed To Fit Husky® Eco Nozzles:

Model No. Description
CP12LP8.5 ¾ Low Perm Hardwall 8.5′ Assembly Hose
CP12LP8.5SV ¾ Low Perm Hardwall 8.5′ Assembly Hose Swivel
CP12LP9 ¾ Low Perm Hardwall 9′ Assembly Hose
CP12LP9SV ¾ Low Perm Hardwall 8.5′ Assembly Hose Swivel
CP12LP.75 ¾ Low Perm Hardwall 9″ Assembly Hose
CP12LP.75SV ¾ Low Perm Hardwall 9″ Assembly Hose Swivel

Designed To Fit Husky® Eco Nozzles:

Model No. Description
003593 Hold Open Clip Kit
000397 Unleaded Spout Gauge

Currently not available.

Click here to view full catalog page

Model No. Description Shipping Weight Lbs (Kg)
New Unleaded Nozzles with NPT
1190404 with Two Notch Hold Open Clip, EZ Lever and Drip Less Spout 2.8 (1.3)
1190406 without Hold Open Clip, with EZ Lever and Drip Less Spout 2.8 (1.3)
12915180 with Two Notch Hold Open Clip, EZ Lever and Drip Less Spout and Flo-Equalizer® 2.8 (1.3)
CONSTRUCTION
Body One-piece die cast aluminum
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever Two-piece high impact polymer
Inlet ¾” / 19.1 mm NPT