Loss motion latch pin, working in conjunction with the spring loaded diaphragm, greatly reduces clicking off and splash back spills.
Unique Flo-Stop® device shuts off when spout is raised above horizontal or falls from the fill pipe.
Delrin tipped stem reduces lever pad wear and allows more positive low flow shut off.
StreamShaper® reduces turbulence and velocity for better ORVR compatibility – straighter fuel flow and less splash back spillage.
- Aluminum reinforced spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
- Contains a poppet disc seal rated at -40°F/C to prevent fuel leakage from the main seal in extreme cold weather.
- Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
- StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
- Nozzle comes with smooth full grip guard.
| Construction |
| Body |
One piece die cast aluminum |
| Seals |
Fluorocarbon |
| Packing |
Double o-ring seal protected by fiber reinforced Teflon® |
| Lever |
One piece contoured steel with hard plastic cover |
| Inlet |
¾” / 19 mm NPT |
Click image to view product numbers and specs:
Designed To Fit Husky® X Nozzles:
| Model No. |
Description |
| 003360 |
¾” F x ¾” F NPT Reconnectable Safe-T-Break® |
| 002273 |
¾” F x ¾” F NPT Non-Reconnectable Safe-T-Break® |
| 006130 |
¾” F x ¾” F NPT Non-Reconnectable PCC Safe-T-Break® |
| 005230 |
¾” F x ¾” F NPT Low Pull Reconnectable Safe-T-Break® |
Designed To Fit Husky® X Nozzles:
| Model No. |
Description |
| 000350 |
¾” M x ¾” F NPT Multi-Plane Swivel |
| 000355 |
¾” M x ¾” F NPT Multi-Plane Black Swivel |
| 002272 |
¾” M x ¾” F NPT 90° Pump Swivel |
| 003895 |
¾” M x ¾” F NPT Inline Swivel |
| 002950 |
¾” M x ¾” F NPT Multi-Plane Restricted Swivel |
Designed To Fit Husky® X Nozzles:
| Model No. |
Description |
| 006310 |
¾” M NPT Multi-Plane Swivel connected to ¾” F NPT Reconnectable Safe-T-Break® |
Designed To Fit Husky® X Nozzles:
| Model No. |
Description |
| 003376 |
Black Handle Guard |
| 004145 |
Full Grip Guard |
| 001806 |
Full Grip Reguard |
| 005494 |
Lever Guard |
| 003440 |
Mate Easy-On Package |
| 003795 |
Mate Guard |
| 008176 |
POPD® EZH Nozzle Guard |
| 008175 |
POPD® EZS Nozzle Guard |
| 007999 |
POPD® H Clear Cover |
| 008185 |
POPD® H Full Grip Guard |
| 008192 |
POPD® H Full Grip Reguard |
| 008166 |
POPD® H Mate Guard |
| 006628 |
POPD® S Clear Cover |
| 006665 |
POPD® S Full Grip Guard |
| 007205 |
POPD® S Full Grip Reguard |
| 008165 |
POPD® S Mate Guard |
| 001506 |
Protection Package |
| 001809 |
Reguard Protection Package |
| 001808 |
Waffle Splash Guard |
Designed To Fit Husky® X Nozzles:
| Model No. |
Description |
| 001473 |
Unleaded Spout without Flo-Stop® |
| 010434 |
Unleaded Long Spout without Flo-Stop® |
| 001471 |
Light Duty Diesel Spout without Flo-Stop® |
| 010353 |
Light Duty Diesel Long Spout without Flo-Stop® |
| 008862 |
Light Duty Diesel Spout without Flo-Stop® with
StreamShaper® |
Designed to Fit Husky® X Nozzles
| Model No. |
Description |
| 004490 |
Conventional Flo-Equalizer® – 10 gpm / 37.9 Lpm |
| 007490 |
Internal Flo-Equalizer® – 10 gpm / 37.9 Lpm |
Designed To Fit Husky® X Nozzles:
| Model No. |
Description |
| 004620 |
2″ Slip-On Pressure Vacuum Vent |
| 004885 |
2″ Thread-On Pressure Vacuum Vent – NPT |
| 005885 |
2″ Thread-On Pressure Vacuum Vent with Internal Screen – NPT |
Designed To Fit Husky® X Nozzles:
| Model No. |
Description |
| 003593 |
Hold Open Clip Kit |
| 007089 |
Nozzle Service Kit |
| 000397 |
Unleaded Spout Gauge |
Click here to view full catalog page
| Model No. |
Description |
Shipping Weight Lbs (Kg) |
| Rebuilt Unleaded Nozzles |
| 503704N^ |
with Three Notch Hold Open Clip |
3.1 (1.4) |
| ^NOT LISTED
|
| Rebuilt Light Duty Diesel Nozzles |
| 503703N^ |
with Three Notch Hold Open Clip |
3.1 (1.4) |
| ^NOT LISTED
|
| CONSTRUCTION |
| Body |
One piece die cast aluminum |
| Seals |
Fluorocarbon |
| Packing |
Double o-ring seal protected by fiber reinforced Teflon® |
| Lever |
One piece contoured steel with hard plastic cover |
| Inlet |
¾” / 19 mm NPT |
Conventional Nozzles
