Conventional Nozzles
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety, and reliability.

Husky® X Double Poppet:
Automatic Nozzle
Automatic shut-off nozzle for full-service and self-service stations.
nozzle double poppet x conventional husky

Loss motion latch pin, working in conjunction with the spring loaded diaphragm, greatly reduces clicking off and splash back spills.
Unique Flo-Stop® device shuts off when spout is raised above horizontal or falls from the fill pipe.
Delrin tipped stem reduces lever pad wear and allows more positive low flow shut off.
StreamShaper® reduces turbulence and velocity for better ORVR compatibility – straighter fuel flow and less splash back spillage.

  • X nozzle shuts off when:
    – the pump shuts off.
    – the gas tank is full.
    – the lever is opened before the pump is turned on.
    – the leak detector has not completed the test cycle.
  • Double poppet allows “to the penny” dispensing.
  • Double poppet is a two (2) step closure reducing the pressure spiking, or “hydraulic hammer” and the adverse effects it has on the hose and dispenser meter.
  • Aluminum reinforced spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
  • StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
  • Comes standard with smooth full grip guard.
Construction
Body One piece die cast aluminum
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever One piece contoured steel with hard plastic cover
Inlet ¾” / 19 mm NPT

Click image to view product numbers and specs:

Designed To Fit Husky® X Nozzles:

Model No. Description
003360 ¾” F x ¾” F NPT Reconnectable Safe-T-Break®
002273 ¾” F x ¾” F NPT Non-Reconnectable Safe-T-Break®
006130 ¾” F x ¾” F NPT Non-Reconnectable PCC Safe-T-Break®
005230 ¾” F x ¾” F NPT Low Pull Reconnectable Safe-T-Break®
003385 ¾” F x ¾” F BSPP Reconnectable Safe-T-Break®
003385A ¾” F x ¾” F BSPP Reconnectable Safe-T-Break® – Atex
002774 ¾” F x ¾” F BSPP Non-Reconnectable Safe-T-Break®
002774A* ¾” F x ¾” F BSPP Non-Reconnectable Safe-T-Break® – Atex

Designed To Fit Husky® X Nozzles:

Model No. Description
000350 ¾” M x ¾” F NPT Multi-Plane Swivel
000355 ¾” M x ¾” F NPT Multi-Plane Black Swivel
002272 ¾” M x ¾” F NPT 90° Pump Swivel
003895 ¾” M x ¾” F NPT Inline Swivel
002950 ¾” M x ¾” F NPT Multi-Plane Restricted Swivel
003590 ¾” M x ¾” F BSPP Multi-Plane Swivel
003590A ¾” M x ¾” F BSPP Multi-Plane Swivel – Atex
002771 ¾” M x ¾” F BSPP 90° Pump Swivel
002771A ¾” M x ¾” F BSPP 90° Pump Swivel – Atex

Designed To Fit Husky® X Nozzles:

Model No. Description
006310 ¾” M NPT Multi-Plane Swivel connected to ¾” F NPT Reconnectable
Safe-T-Break®
007085 ¾” M BSPP Multi-Plane Swivel connected to ¾” F BSPP Reconnectable
Safe-T-Break®
007085A ¾” M BSPP Multi-Plane Swivel connected to ¾” F BSPP Reconnectable
Safe-T-Break® – Atex

Designed To Fit Husky® X Nozzles:

Model No. Description
003376 Black Handle Guard
004145 Full Grip Guard
001806 Full Grip Reguard
005494 Lever Guard
003795 Mate Guard
003440 Mate Easy-On Package
008176 POPD® EZH Nozzle Guard
008175 POPD® EZS Nozzle Guard
007999 POPD® H Clear Cover
008166 POPD® H Mate Guard
008185 POPD® H Full Grip Guard
008192 POPD® H Full Grip Reguard
006628 POPD® S Clear Cover
006665 POPD® S Full Grip Guard
007205 POPD® S Full Grip Reguard
008165 POPD® S Mate Guard
001506 Protection Package
001809 Reguard Protection Package
001808 Waffle Splash Guard

Designed to Fit Husky® X Nozzles

Model No. Description
001473 Unleaded Spout without Flo-Stop®
010434 Unleaded Long Spout without Flo-Stop®
001471 Light Duty Diesel Spout without Flo-Stop®
010353 Light Duty Diesel Long Spout without Flo-Stop®
008862 Light Duty Diesel Spout without Flo-Stop® with
StreamShaper®

Designed to Fit Husky® X Nozzles

Model No. Description
004490 Conventional Flo-Equalizer® – 10 gpm / 37.9 Lpm
007490 Internal Flo-Equalizer® – 10 gpm / 37.9 Lpm

Designed To Fit Husky® X Nozzles:

Model No. Description
004620 2″ Slip-On Pressure Vacuum Vent
004885 2″ Thread-On Pressure Vacuum Vent – NPT
005885 2″ Thread-On Pressure Vacuum Vent with Internal Screen – NPT

Designed To Fit Husky® X Nozzles:

Model No. Description
003593 Hold Open Clip Kit
007089 Nozzle Service Kit
000397 Unleaded Spout Gauge

Click here to view full catalog page

Model No. Description Shipping Weight Lbs (Kg)
New Unleaded Nozzles with NPT
538404N^ With Three Notch Hold Open Clip 3.1 (1.4)
538424N^ With Three Notch Hold Open Clip and Sightglass 3.1 (1.4)
538476N^ With Three Notch Hold Open Clip and Waffle Splash Guard 3.1 (1.4)
^NOT LISTED
New Light Duty Diesel Nozzles with NPT
538403N^ Light Duty Diesel with Three Notch Hold Open Clip 3.1 (1.4)
5384135N^ Light Duty Diesel with Three Notch Hold Open Clip and StreamShaper® 3.1 (1.4)
^NOT LISTED
New Unleaded Nozzles with BSPP
538416N^ With Three Notch Hold Open Clip 3.1 (1.4)
E538416N^ With Three Notch Hold Open Clip 3.1 (1.4)
E538416A* With Three Notch Hold Open Clip – Atex 3.1 (1.4)
E538420 Without Hold Open Clip 3.1 (1.4)
^NOT LISTED
New Light Duty Diesel Nozzles with BSPP
538415N^ With Three Notch Hold Open Clip 3.1 (1.4)
E538415N^ With Three Notch Hold Open Clip 3.1 (1.4)
E538419 Without Hold Open Clip 3.1 (1.4)
^NOT LISTED
CONSTRUCTION
Body One piece die cast aluminum
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever One piece contoured steel with hard plastic cover
Inlet ¾” / 19 mm NPT