Conventional Nozzles
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety, and reliability.

Husky X® EZ Lever: PGH Nozzles Automatic shut-off nozzle for full-service and self-service stations.
nozzle BSPP XS conventional husky

Loss motion latch pin, working in conjunction with the spring loaded diaphragm, greatly reduces clicking off and splash back spills.
Unique Flo-Stop® device shuts off when spout is raised above horizontal or falls from the fill pipe.
Delrin tipped stem reduces lever pad wear and allows more positive low flow shut off.
StreamShaper® reduces turbulence and velocity for better ORVR compatibility – straighter fuel flow and less splash back spillage.

  • Husky X® nozzle shuts off when:
    — the gas tank is full.
    Stainless steel spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
  • StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
  • Comes standard with smooth full grip guard.
  • Two-piece lever is easier to use:
    — requires half the force to open nozzle.
    — ADA compliant.
Construction
Body Die cast aluminum with polymer handguard
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever Two-piece Polymer level
Inlet ¾” / 19 mm BSPP

Click image to view product numbers and specs:

Designed To Fit Husky X® EZ Nozzles:

Model No. Description
003360 ¾” F x ¾” F NPT Reconnectable Safe-T-Break®
002273 ¾” F x ¾” F NPT Non-Reconnectable Safe-T-Break®
006130 ¾” F x ¾” F NPT Non-Reconnectable PCC Safe-T-Break®
005230 ¾” F x ¾” F NPT Low Pull Reconnectable Safe-T-Break®

Designed To Fit Husky X® EZ Nozzles:

Model No. Description
000350 ¾” M x ¾” F NPT Multi-Plane Swivel
000355 ¾” M x ¾” F NPT Multi-Plane Swivel Anodized Black
002272 ¾” M x ¾” F NPT 90° Pump Swivel
003895 ¾” M x ¾” F NPT Inline Swivel
002950 ¾” M x ¾” F NPT Multi-Plane Restricted Swivel

Designed To Fit Husky X® EZ Nozzles:

Model No. Description
006310 ¾” M NPT Multi-Plane Swivel connected to ¾” F NPT Reconnectable
Safe-T-Break®

Designed To Fit Husky X® EZ Nozzles:

Model No. Description
003376 Black Handle Guard
004145 Full Grip Guard
001806 Full Grip Reguard
005494 Lever Guard
003440 Mate Easy-On Package
003795 Mate Guard
008175 POPD® EZS Nozzle Guard
008176 POPD® EZH Nozzle Guard
007999 POPD® H Clear Cover
008185 POPD® H Full Grip Guard
008192 POPD® H Full Grip Reguard
008166 POPD® H Mate Guard
006628 POPD® S Clear Cover
006665 POPD® S Full Grip Guard
007205 POPD® S Full Grip Reguard
008165 POPD® S Mate Guard
001506 Protection Package
001809 Reguard Protection Package
001808 Waffle Splash Guard

Designed To Fit Husky X® EZ Nozzles:

Model No. Description
001473 Unleaded Spout without Flo-Stop®
010434 Unleaded Long Spout without Flo-Stop®
001471 Light Duty Diesel Spout without Flo-Stop®
010353 Light Duty Diesel Long Spout without Flo-Stop®

Designed To Fit Husky X® EZ Nozzles:

Model No. Description
004490 Conventional Flo-Equalizer® – 10 gpm / 37.9 Lpm
007490 Internal Flo-Equalizer® – 10 gpm / 37.9 Lpm

Designed To Fit Husky X EZ Nozzles:

Model No. Description
004620 2″ Slip-On Pressure Vacuum Vent
004885 2″ Thread-On Pressure Vacuum Vent – NPT
005885 2″ Thread-On Pressure Vacuum Vent with Internal Screen – NPT

Designed To Fit Husky X® EZ Nozzles:

Model No. Description
003593 Hold Open Clip Kit
007089 Nozzle Service Kit
000397 Unleaded Spout Gauge

Click here to view full catalog page

Model No. Description Shipping Weight Lbs (Kg)
New Unleaded Nozzles
1163404N with Two Notch Hold Open Clip 3.0 (1.4)
116342535 without Hold Open Clip, with POPD® S and Waffle Splash Guard 3.0 (1.4)
13458119N^ with Two Notch Hold Open Clip and POPD® H 3.0 (1.4)
13458214N^ with Two Notch Hold Open Clip, Long Spout and Excessive Heat Resistance 3.0 (1.4)
1163466 without Hold Open Clip, with Waffle Splash Guard 3.0 (1.4)
11634124 without Hold Open Clip, with POPD® H and Waffle Splash Guard 3.0 (1.4)
^NOT LISTED
New Light Duty Diesel Nozzles
1163403N with Two Notch Hold Open Clip 3.1 (1.4)
13458204N^ with Two Notch Hold Open Clip and POPD® H 3.1 (1.4)
13458215N^ with Two Notch Hold Open Clip, Long Spout and Excessive Heat Resistance 3.1 (1.4)
1163467 without Hold Open Clip, with Waffle Splash Guard 3.1 (1.4)
11634120 with Hold Open Clip, with POPD® H and Waffle Splash Guard 3.1 (1.4)
^NOT LISTED
CONSTRUCTION
Body Die cast aluminum with polymer handguard
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever Polymer lever
Inlet ¾” / 19.1 mm NPT