
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety, and reliability.
Husky XS® Double Poppet:
Automatic Nozzle Pressure activated, automatic shut-off nozzle for full-service and self-service stations.
Automatic Nozzle Pressure activated, automatic shut-off nozzle for full-service and self-service stations.





Loss motion latch pin, working in conjunction with the spring loaded diaphragm, greatly reduces clicking off and splash back spills.
Unique Flo-Stop® device shuts off when spout is raised above horizontal or falls from the fill pipe.
Delrin tipped stem reduces lever pad wear and allows more positive low flow shut off.
StreamShaper® reduces turbulence and velocity for better ORVR compatibility – straighter fuel flow and less splash back spillage.

- Husky XS® nozzle shuts off when:
— the pump shuts off
— the gas tank is full
— the lever is opened before the pump is turned on
— the leak detector has not completed its test cycle. - Double Poppet allows “to the penny” dispensing.
- Double Poppet is a two (2) step closure reducing the amount of pressure spiking, or “hydraulic hammer” and the adverse effects that this has on the hose and dispenser meter.
- A reinforced stainless steel spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
- Equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
- StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
- Comes standard with smooth full grip guard.
Construction | |
---|---|
Body | One piece die cast aluminum |
Seals | Fluorocarbon |
Packing | Double o-ring seal protected by fiber reinforced Teflon® |
Lever | One piece contoured steel with hard plastic cover |
Inlet | ¾” / 19 mm NPT or BSPP threads |
