Conventional Nozzles
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety, and reliability.

Husky XS® MFM:
Pressure Activated Automatic Nozzle
Pressure activated, automatic shut-off nozzle for full-service and self-service stations.

Loss motion latch pin, working in conjunction with the spring loadeded diaphragm, greatly reduces clicking off and splash back spills.
Unique Flo-Stop® device shuts off when spout is raised above horizontal or falls from the fill pipe.
Delrin tipped stem reduces lever pad wear and allows more positive low flow shut off.
StreamShaper® reduces turbulence and velocity for better ORVR compatibility – straighter fuel flow and less splash back spillage.
Torsion clip spring enhances lever durability – no more breaking.

  • Husky XS® nozzle shuts off when:
    — the pump shuts off.
    — the gas tank is full.
    — the lever is opened before the pump is turned on.
    — the leak detector has not completed its test cycle.
  • A reinforced stainless steel spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
  • StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
  • Comes standard with smooth full grip guard.
Construction
Body One piece die cast aluminum
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever One piece contoured steel with hard plastic cover
Inlet 1″ / 25.4 mm NPT

Click image to view product numbers and specs:

Designed To Fit Husky XS® MFM Nozzles:

Model No. Description
002276 1″ F x 1″ F NPT Reconnectable Safe-T-Break®
005812 1″ F x 1″ F NPT Non-Reconnectable Safe-T-Break®
006301 1″ F x 1″ F NPT Non-Reconnectable PCC Safe-T-Break®
005231 1″ F x 1″ F NPT Low Pull Reconnectable Safe-T-Break®

Designed To Fit Husky XS® MFM Nozzles:

Model No. Description
000087 1″ M x 1″ F NPT Multi-Plane Swivel
004860 1″ M x 1″ F NPT Multi-Plane High Flow Swivel
000095 1″ M x 1″ F NPT 70° Pump Swivel
003395 1″ M x 1″ F NPT Multi-Plane Restricted Swivel
000352 1″ M x ¾” F NPT Multi-Plane Swivel
000356 1″ M x ¾” F NPT Multi-Plane Swivel Anodized Black

Designed To Fit Husky XS® MFM Nozzles:

Model No. Description
005969 1″ M NPT Multi-Plane Swivel connected to 1″ F NPT Reconnectable Safe-T-Break®

Designed To Fit Husky XS® MFM Nozzles:

Model No. Description
004145 Full Grip Guard
001806 Full Grip Reguard
005494 Lever Guard
008176 POPD® EZH Nozzle Guard
008175 POPD® EZS Nozzle Guard
007999 POPD® H Clear Cover
008185 POPD® H Full Grip Guard
008192 POPD® H Full Grip Reguard
008166 POPD® H Mate Guard
006628 POPD® S Clear Cover
006665 POPD® S Full Grip Guard
007205 POPD® S Full Grip Reguard
008165 POPD® S Mate Guard
001506 Protection Package
001809 Reguard Protection Package
001808 Waffle Splash Guard

Designed To Fit Husky XS® MFM Nozzles:

Model No. Description
001473 Unleaded Spout without Flo-Stop®
010434 Unleaded Long Spout without Flo-Stop®
001471 Light Duty Diesel Spout without Flo-Stop®
010353 Light Duty Diesel Long Spout without Flo-Stop®
008862 Light Duty Diesel Long Spout without Flo-Stop® with
StreamShaper®

Designed To Fit Husky XS® MFM Nozzles:

Model No. Description
004620 2″ Slip-On Pressure Vacuum Vent
004885 2″ Thread-On Pressure Vacuum Vent – NPT
005885 2″ Thread-On Pressure Vacuum Vent with Internal Screen – NPT

Designed To Fit Husky XS® MFM Nozzles:

Model No. Description
007089 Nozzle Service Kit
003593 Hold Open Clip Kit
000397 Unleaded Spout Gauge
000385 1″ M x ¾” F Reducer Bushing

Click here to view full catalog page

Model No. Description Shipping Weight Lbs (Kg)
New Unleaded Nozzles
159562 with Three Notch Hold Open Clip and Waffle Splash Guard 3.3 (1.4)
159568 without Hold Open Clip, with Red VSG, Sightglass and Lenticular Lens 3.0 (1.3)
New Light Duty Diesel Nozzles
159560 with Three Notch Hold Open Clip and Waffle Splash Guard 3.3 (1.4)
539660 with Three Notch Hold Open Clip, Double Poppet and Waffle Splash Guard 3.3 (1.4)
CONSTRUCTION
Body One piece die cast aluminum
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever One piece contoured steel with hard plastic cover
Inlet 1″ / 25.4 mm NPT