Farm and Commercial
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety and reliability.

Husky® 1GSS: Cold Weather Metal Nozzle Pressure activated, automatic shut-off nozzle with metal hand guard for farm, 12V skid tanks, large pumps with our without air eliminators and commercial applications.
nozzle farm commercial 1gss husky

Loss motion latch pin, working in conjunction with the spring loaded diaphragm, greatly reduces clicking off and splash back spills.
Unique Flo-Stop® device shuts off when spout is raised above horizontal or falls from the fill pipe.
Delrin tipped stem reduces lever pad wear and allows more positive low flow shut off.
StreamShaper® reduces turbulence and velocity for better ORVR compatibility – straighter fuel flow and less splash back spillage.

  • 1GSS nozzle shuts off when:
    – the pump shuts off.
    – the gas tank is full.
    – the lever is opened before the pump is turned on.
    – the leak detector has not completed the test cycle.
  • Contains a poppet disc seal, rated at -40° F/C to
    prevent fuel leakage from the main seal in extreme cold weather.
  • Nozzle is equipped with unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
  • Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.Not for use with gravity tanks.
  • Not legal for retail dispensing applications.
  • Stainless steel reinforced spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
  • Comes standard with smooth full grip guard.
Construction
Body Die cast aluminum body with metal hand guard
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever One piece contoured steel with hard plastic cover
Inlet 1″ / 25.4 mm NPT & BSPP

Click image to view product numbers and specs:

Designed To Fit Husky® 1GSS Nozzles:

Model No. Description
002276 1″ F x 1″ F NPT Reconnectable Safe-T-Break®
005812 1″ F x 1″ F NPT Non-Reconnectable Safe-T-Break®
006301 1″ F x 1″ F NPT Non-Reconnectable PCC Safe-T-Break®
005231 1″ F x 1″ F NPT Low Pull Reconnectable Safe-T-Break®
003076 1″ F x 1″ F BSPP Reconnectable Safe-T-Break®
003076A 1″ F x 1″ F BSPP Reconnectable Safe-T-Break® – Atex
006914 1″ F x 1″ F BSPP Non-Reconnectable Safe-T-Break®

Designed To Fit Husky® 1GSS Nozzles:

Model No. Description
000087 1″ M x 1″ F NPT Multi-Plane Swivel
000087W 1″ M x 1″ F NPT Multi-Plane Swivel with Warm Weather Seals
000095 1″ M x 1″ F NPT 70° Pump Swivel
003395 1″ M x 1″ F NPT Multi-Plane Restricted Swivel
000352 1″ M x ¾” F NPT Multi-Plane Swivel
000356 1″ M x ¾” F NPT Multi-Plane Swivel Anodized Black
003306 1″ M x 1″ F BSPP Multi-Plane Swivel
003306A 1″ M x 1″ F BSPP Multi-Plane Swivel – Atex
003306W 1″ M x 1″ F BSPP Multi-Plane Swivel with Warm Weather Seals

Designed To Fit Husky® 1GSS Nozzles:

Model No. Description
005969 1″ M NPT Multi-Plane Swivel connected to 1″ F NPT Reconnectable
Safe-T-Break®
008015 1″ M BSPP Multi-Plane Swivel connected to 1″ F BSPP Reconnectable
Safe-T-Break®
008015A 1″ M BSPP Multi-Plane Swivel connected to 1″ F BSPP Reconnectable
Safe-T-Break® – Atex

Designed To Fit Husky® 1GS Nozzles:

Model No. Description
000554 Full Grip Guard
001804 Full Grip Reguard
005494 Lever Guard
000226 Mate Nozzle Guard
007376 Mate Handle Guard
008180 POPD® EZH Nozzle Guared
008179 POPD® EZS Nozzle Guard
007999 POPD® H Clear Cover
008170 POPD® H Mate Guard
008183 POPD® H Full Grip Guard
008190 POPD® H Full Grip Reguard
006628 POPD® S Clear Cover
006655 POPD® S Full Grip Guard
007210 POPD® S Full Grip Reguard
008169 POPD® S Mate Guard

Designed To Fit Husky® 1GS Nozzles:

Model No. Description
001473 Unleaded Spout without Flo-Stop®
010434 Unleaded Long Spout without Flo-Stop®
001471 Light Duty Diesel Spout without Flo-Stop®
010353 Light Duty Diesel Long Spout without Flo-Stop®
008862 Light Duty Diesel Spout without Flo-Stop® with
StreamShaper®
005215 Heavy Duty Diesel Spout with Flo-Stop®

Designed To Fit Husky® 1GSS Nozzles:

Model No. Description
004620 2″ Slip-On Pressure Vacuum Vent
004885 2″ Thread-On Pressure Vacuum Vent – NPT
005885 2″ Thread-On Pressure Vacuum Vent with Internal Screen – NPT

Designed To Fit Husky® 1GSS Nozzles:

Model No. Description
007089 Nozzle Service Kit
003593 Hold Open Clip Kit
000385 1″ M x ¾” F Reducer Bushing – NPT
001717 1″ M x ¾” F Reducer Bushing – BSPP
000397 Unleaded Spout Gauge
000548 Hanging Hook for Unleaded and Light Duty Diesel Nozzles

Click here to view full catalog page

Model No. Description Shipping Weight Lbs (Kg)
New Unleaded Nozzles with NPT
1399704 with Three Notch Hold Open Clip and Hook 3.6 (1.6)
New Light Duty Diesel Nozzles with NPT
1399703 with Three Notch Hold Open Clip and Hook 3.6 (1.6)
New Heavy Duty Diesel Nozzles with NPT
1399710 with Three Notch Hold Open Clip and Hook without Flo-Stop® 3.6 (1.6)
CONSTRUCTION
Body Die case aluminum body with metal hand guard
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever One piece contoured steel with hard plastic cover
Inlet 1″ / 25.4 mm NPT & BSPP