Truck and High Volume
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety and reliability.

Husky® 1690 Cold Weather:
High Volume Automatic Shut-off Nozzle
High volume automatic shut-off nozzle provides 100 gpm and is 30% lighter than similar nozzles.
nozzle cold weather truck high volume 1690 1691 husky

Loss motion latch pin, working in conjunction with the spring loaded diaphragm, greatly reduces clicking off and splash back spills.
Check valve is in nozzle body, not spout, for inexpensive and fast spout replacement.
Right angle design allows nozzle to fit close to walls and corners.
Self adjusting stem packing.
Large hand opening to accommodate gloves or mittens.
Dual poppet design for easier opening of nozzle when high system pressure is present.

  • Contains a poppet disc seal, rated at -40° F/C (exceeding the UL standard of -20° F / -29° C) to prevent fuel leakage from the main seal in extreme cold weather.
  • Nozzle is designed with extra large hand opening to accommodate gloves or mittens.
  • Check valve is in nozzle body, not the spout, for inexpensive and fast spout replacement.
  • Two position hold open latch.
  • Self-adjusting stem packing – no field adjustment is required.
  • Automatic shut-off with dual poppets for easy opening.
  • Right angle design allows nozzle to “fit” close to walls and corners.
  • Cast-in protective standoffs provide durability with rough usage.
Construction
Body Die Cast Aluminum
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever One piece contoured steel with hard plastic cover
Inlet 1½” / 38 mm NPT
Spout 1-3/8″ / 34.9 mm O.D.

Click image to view product numbers and specs:

Designed To Fit Husky® 1690/1691 Nozzles:

Model No. Description
005235 1¼” / 32 mm F x 1¼” / 32 mm M Inline Swivel
005240 1¼” / 32 mm F x 1½” / 38 mm M Inline Swivel
005265 1½” / 38 mm F x 1¼” / 32 mm M Inline Swivel
005266 1½” / 38 mm F x 1½” / 38 mm M Inline Swivel

Designed to Fit Husky® 1690/1691 Nozzles:

Model No. Description
004889 Spout without shear groove

Designed to Fit Husky® 1690/1691 Nozzles:

Model No. Description
004620 2″ Slip-On Pressure Vacuum Vent
004885 2″ Thread-On Pressure Vacuum Vent – NPT
005885 2″ Thread-On Pressure Vacuum Vent with Internal Screen – NPT

Designed to Fit Husky® 1690/1691 Nozzles:

Model No. Description
007089 Nozzle Service Kit

Click here to view full catalog page

Model No. Description Shipping Weight Lbs (Kg)
New Nozzles
652310N^ with two position hold-open latch 3.96 (1.79)
^NOT LISTED
Rebuilt Nozzles
879810N^ with two position hold-open latch 3.96 (1.79)
^NOT LISTED
CONSTRUCTION
Body Die Cast Aluminum
Seals Fluorocarbon
Packing Double o-ring seal protected by fiber reinforced Teflon®
Lever One piece contoured steel with hard plastic cover
Inlet 1½” 38 mm NPT
Spout 1-3/8″ 34.9 mm O.D.