Vapor Recovery
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety and reliability.

Husky® V3:
Vacuum Assist Automatic Shut-off Nozzle
Pressure activated, automatic shut-off, vacuum assist nozzle for full-service,
self-service and unattended stations.

nozzle vapor recovery vacuum assist v3 husky

Loss motion latch pin, working in conjunction with spring loaded diaphragm, greatly reduces clicking off and splash back spills.
Nozzle is equipped with unique Flo-Stop® device that shuts off the nozzle if it falls from the fill neck or raises above the horizontal.
Coaxial spout assembly with large vapor capturing holes at the end of the spout.
Delrin tipped stem: reduces lever pad wear and allows more positive low flow shut off.
Torsion clip spring enhances lever durability.
Stainless steel reinforced spout bushing keeps spout tip round.

  • Husky® V3 nozzle shuts off when:
    — the pump shuts off.
    — the gas tank is full.
    — the lever is opened before the pump is turned on.
    — the leak detector has not completed the test cycle.
  • Husky® V3 nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
  • Husky® vapor return line is an internal part of the body casting, thus eliminating potential vapor leak points.
  • Uses coaxial spout with spout spring and has large vapor-capturing holes at the end of the spout.
  • Nozzle spout and spout spring are covered by a one year warranty.
  • Plunger design provides a better seal to eliminate potential leaking and staining.
Construction
Body Aluminum
Seals Fluorocarbon
Packing Fiber reinforced Teflon® Double O-Ring Seal
Lever One-piece contoured steel with hard plastic cover
Inlet M34 x 1.5

Click image to view product numbers and specs:

Designed To Fit Husky® V3 Nozzles:

Model No. Description
004034 Reconnectable Safe-T-Break®
004034A Reconnectable Safe-T-Break® – Atex
005134 Non-Reconnectable Safe-T-Break®
005134A Non-Reconnectable Safe-T-Break® – Atex
0010513 Non-Reconnectable Safe-T-Break® Shearpin

Designed To Fit Husky® V3 Nozzles:

Model No. Description
004605 Inverted Vapor Assist Swivel
004605A Inverted Vapor Assist Swivel – Atex

Designed To Fit Husky® V3 Nozzles:

Model No. Description
004620 2″ Slip-On Pressure Vacuum Vent
004885 2″ Thread-On Pressure Vacuum Vent – NPT
005885 2″ Thread-On Pressure Vacuum Vent with internal screen – NPT

Designed To Fit Husky® V3 Nozzles:

Model No. Description
006289 Complete Spout Assembly Kit – Unleaded
006389 Unleaded Spout

Designed To Fit Husky® V3 Nozzles:

Model No. Description
005170 Full Grip Guard
005169 Full Grip Reguard
005494 Lever Guard
006955 Waffle Splash Guard

Designed To Fit Husky® V3 Nozzles:

Model No. Description
005837 Vapor Assist Flo-Equalizer®

Designed To Fit Husky® V3 Nozzles:

Model No. Description
004360 Air/Liquid Spout Adaptor
003593 Hold Open Clip Kit
007089 Nozzle Service Kit
005233 O-Ring Kit
005260 Tool for Dry Air/Liquid Test
000397 Unlead Spout Gauge

Click here to view full catalog page

Model No. Description Shipping Weight Lbs (Kg)
New Unleaded Nozzles
6201049 with Three Notch Hold Open Clip 3.6 (1.6)
6201089 without Hold Open Clip 3.6 (1.6)
Rebuilt Unleaded Nozzles
6241049 with Three Notch Hold Open Clip 3.6 (1.6)
6241089 without Hold Open Clip 3.6 (1.6)
Construction
Body Aluminum
Seals Fluorocarbon
Packing Fiber reinforced Teflon® Double O-Ring Seal
Lever One-piece contoured steel with hard plastic cover
Inlet M34 x 1.5