Vapor Recovery
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety and reliability.

Husky® V34 ORVR:
Vacuum Assist Automatic Shut-Off Nozzle
Pressure activated, automatic shut-off, vacuum assist nozzle for full-service, self-service and unattended stations.
nozzle vapor recovery orvr vacuum assist v34 husky

Loss motion latch pin, working in conjunction with the spring loaded diaphragm, greatly reduces clicking off and splash back spills.
Robust vapor valve configuration eliminates “limp lever” and; anodized aluminum parts to prevent corrosion.
Vapor splash guard compatible with Veeder-Root® / VST hose with ORVR valve and standard refueling with ORVR and non-ORVR vehicles.
Stainless steel reinforced spout bushing keeps the spout tip round.
Stream Shaper® reduces turbulence & velocity for better ORVR compatibility – straighter fuel flow & less splash back spillage.
Flo-Stop® device shuts off nozzle if it falls from fill neck or when raised above horizontal.
Delrin tipped stem reduces lever pad wear and allows proper low flow shut off.
Torsion clip spring enhances lever durability – no more breaking.
One piece, all metal, casting design for structural integrity.
1¼” – 18 inlet thread design for use with Veeder-Root® 900301 and VST Enviro-Loc™ primary hose with ORVR valve.

  • Husky® V34 ORVR nozzle shuts off when:
    — the pump shuts off.
    — the gas tank is full.
    — the lever is opened before the pump is turned on.
    — the leak detector has not completed the test cycle.
  • Nozzle designed for the Veeder-Root® 900301 and VST Enviro-Loc™ primary hose with ORVR valve.
  • Strong vapor valve in the nozzle that is mechanically operated by the on-off action of the nozzle’s lever.
  • Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
  • StreamShaper® reduces turbulence for straighter flow and less splash back spillage.
  • Uses conventional spout with spout ring and soft vapor escape guard.
  • Husky® vapor return line is an internal part of the body casting, thus eliminating potential vapor leak points and fugitive evaporative emissions from the fuel remaining in the vapor path of the hose.
  • Vapor assist is achieved at the body end of the spout where a vapor ring captures emissions.
Construction
Body Aluminum
Seals Fluorocarbon
Packing Fiber Reinforced Teflon®
Lever One-Piece Contoured Steel with Hard Plastic Cover
Inlet 1¼” – 18 Thread

Click image to view product numbers and specs:

Designed To Fit Husky® V34 ORVR Nozzle:

Model No. Description
006560 Reconnectable ORVR Safe-T-Break®

Designed To Fit Husky® 34V ORVR Nozzle:

Model No. Description
004620 2″ Slip-On Pressure Vacuum Vent
004885 2″ Thread-On Pressure Vacuum Vent – NPT
005885 2″ Thread-On Pressure Vacuum Vent with internal screen – NPT

Designed To Fit Husky® 34V ORVR Nozzle:

Model No. Description
006951 Full Grip Guard
004231 Full Grip Reguard
005494 Lever Guard
007999 POPD® H Clear Guard
008184 POPD® H Full Grip Guard
008191 POPD® H Full Grip Reguard
006628 POPD® S Clear Guard
006660 POPD® S Full Grip Guard
007220 POPD® S Full Grip Reguard

Designed To Fit Husky® 34V ORVR Nozzle:

Model No. Description
005837 Vapor Assist Flo-Equalizer®

Designed To Fit Husky® 34V ORVR Nozzle:

Model No. Description
006663 Complete Spout Assembly Kit – Unleaded
006391 Unleaded Spout

Designed To Fit Husky® 34V ORVR Nozzle:

Model No. Description
004360 A/L Spout Adaptor
003593 Hold Open Clip Kit
007089 Nozzle Service Kit
005233 O-Ring Replacement Kit
006656 ORVR Vapor Splash Guard (VSG) with Clamp
005260 Tool For Dry A/L Test
005837 Vapor Assist Flo-Equalizer®
004039 Vapor Splash Guard Clamp
006497 VSG Clamp Tool

Click here to view full catalog page

Model No. Description Shipping Weight Lbs (Kg)
New Unleaded Nozzle
6536041 with Three Notch Hold Open Clip 4.0 (1.8)
CONSTRUCTION
Body Aluminum
Seals Fluorocarbon
Packing Fiber Reinforced Teflon®
Lever One-Piece Contoured Steel with Hard Plastic Cover
Inlet 1¼” – 18 Thread