lookup ran yes
ZIP CODE: 63116
chosen distributor:
interest categories:
General Questions
Where To Buy
Customer Service
Home | Husky | Nozzles | 1AS Nozzle
#1215903: Conventional, Pressure Activated Automatic Shut-Off
1AS Nozzle
1" Light Duty Diesel Nozzle with Three Notch Hold Open Clip and Polymer Handguard
Product Info
Specs / Construction
Pressure Activated automatic shut-off nozzle for full-service and self-service stations.
  • 1A nozzle shuts off when:
    — the pump shuts off.
    — the gas tank is full.
    — the lever is opened before the pump is turned on.
    — the leak detector has not completed the test cycle.
  • Stainless steel reinforced spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
  • StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
  • Comes standard with smooth full grip guard.
  • Optional tilt poppet design provides precise “to-the-penny” dispensing.
  • Optional cold weather seals are rated to -40°F/C.
  • Optional Gilbarco, Tokheim, and Wayne handguards can be fitted with a magnet to trigger the dispenser’s proximity switch, or can be provided without the magnet for dispensers equipped with a standard “flapper” switch.

Body: One piece die cast aluminum with high-impact polymer handguard
Seals: Fluorocarbon
Packing: Double o-ring seal protected by fiber reinforced Teflon®
Lever: One-piece contoured steel with hard polymer cover
Inlet: 1” / 25.4 mm NPT

Flow Rate
1AS flow chart image
1AS EZL dimension image
Configure a Complete Fueling System
Choose any options that are applicable. If you would prefer a complete pump-to-car hanging hardware assembly that is certified, pre-assembled, pressure and continuity tested hanging hardware, select the “Make it an EZ-Connect®” tab to configure your EZ-Connect®.
Add Accessories / Options
Make it an EZ-Connect®
Choose a Swivel
Choose …
000087: 1” M x 1” F NPT Multi-Plane Swivel
000095: 1” M x 1” F NPT 70° Pump Swivel
000352: 1” M x ¾” F NPT Multi-Plane Swivel
000356: 1” M x ¾” F NPT Multi-Plane Swivel Anodized Black
003395: 1” M x 1” F NPT Multi-Plane Restricted Swivel
004860: 1” M x 1” F NPT Multi-Plane High Volume Swivel
Choose a Safe-T-Break®
Choose …
002276: 1” F x 1” F NPT Reconnectable Safe-T-Break®
005231: 1” F x 1” F NPT Low Pull Reconnectable Safe-T-Break®
005812: 1” F x 1” F NPT Non-Reconnectable Safe-T-Break®
006301: 1” F x 1” F NPT Non-Reconnectable PCC Safe-T-Break®
008331: 1” F x 1” F NPT CK Reconnectable MAGBREAK®
Choose Swivel/STB Combo
Choose …
005969: 1” M NPT Multi-Plane Swivel connected to 1” F NPT Reconnectable Safe-T-Break®
Choose Spout
Choose …
001471: Light Duty Diesel Spout without Flo-Stop® with StreamShaper®
001473: Unleaded Spout without Flo-Stop®
010353: Light Duty Diesel Long Spout without Flo-Stop®
010434: Unleaded Long Spout without Flo-Stop®
Choose Pressure/Vacuum Vent
Choose …
004620: 2” Slip-On Pressure Vacuum Vent
004885: 2” Thread-On Pressure Vacuum Vent - NPT
005885: 2” Thread-On Pressure Vacuum Vent with Internal Screen - NPT
Choose Accessories, Testing and Maintenance
Choose …
000385: 1” M x ¾” F Reducer Bushing
000397: Unleaded Spout Gauge
003593: Hold Open Clip Kit
007089: Nozzle Service Kit
Choose Guards
Choose …
001807: Waffle Splash Guard with Smaller Hole
001808: Waffle Splash Guard
005494: Lever Guard
007295: Polymer Handle Cover
012164: Full Grip Guard
Please contact your distributor for information on creating an EZ-Connect for this nozzle.
EZ-Connects for this product have not been configured.
Ready to exceed expectations? Find the nearest distributor to get started.