lookup ran yes
ZIP CODE: 63116
chosen distributor:
interest categories:
General Questions
Where To Buy
Customer Service
Home | Husky | Nozzles | ECO Nozzle
#1190403: Conventional, Automatic Shut-Off
ECO Nozzle
3/4" Light Duty Diesel Nozzle with 2-Notch Hold Open Clip, with Full Grip Guard, Mechanical Interlock Activated
Product Info
Specs / Construction
Automatic shut-off conventional nozzle equipped with a mechanical interlock that shuts off the nozzle if it falls from the fill tank.
  • Unique internal interlock device that shuts off the fuel flow before the spout is out of the tank.
  • Aluminum casting with high impact polymer hand guard provides a lightweight, easier to handle conventional nozzle.
  • 2-piece lever is easier to use:
    — requires ½ the force to open nozzle
    — ADA compliant
  • A reinforced stainless steel spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • Drip Less spout reduces/ eliminates drips from spout.
  • StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
  • Lightest insertion “force” of any safety interlock operated nozzle.
  • Comes standard with smooth full grip guard.
  • CARB compliant for drips, spills, spitting and liquid retention.
  • Unique tilt poppet maximizes “to-the-penny” dispensing.

Body: One-piece die cast aluminum
Seals: Fluorocarbon
Packing: Double o-ring seal protected by fiber reinforced Teflon®
Lever: One-piece polymer
Inlet: 3/4" / 19.1 mm NPT

Flow Rate
Configure a Complete Fueling System
Choose any options that are applicable. If you would prefer a complete pump-to-car hanging hardware assembly that is certified, pre-assembled, pressure and continuity tested hanging hardware, select the “Make it an EZ-Connect®” tab to configure your EZ-Connect®.
Add Accessories / Options
Make it an EZ-Connect®
Choose a Swivel
Choose …
000350: ¾” M x ¾” F NPT Multi-Plane Swivel
002272: ¾” M x ¾” F NPT 90° Pump Swivel
Choose a Safe-T-Break®
Choose …
003360: ¾” F x ¾” F NPT Reconnectable Safe-T-Break®
002273: ¾” F x ¾” F NPT Non-Reconnectable Safe-T-Break®
006130: ¾” F x ¾” F NPT Non-Reconnectable PCC Safe-T-Break®
008330: ¾” F x ¾” F NPT Reconnectable MagBreak®
Choose Swivel/STB Combo
Choose …
006310: ¾” M NPT Multi-Plane Swivel connected to ¾” F NPT Reconnectable Safe-T-Break®
Choose Spout
Choose …
013664: Unleaded ECO Spout Assembly Kit
Choose Pressure/Vacuum Vent
Choose …
005041: 3” Thread to 2” Adaptor - NPT
Choose Accessories, Testing and Maintenance
Choose …
004490: Conventional Flo-Equalizer® - 10 gpm / 37.9 Lpm
003593: Hold Open Clip Kit
007490: Internal Flo-Equalizer® - 10 gpm / 37.9 Lpm
000397: Unleaded Spout Gauge
Choose Low Perm Hoses
Choose …
CP12LP8.5: 3/4” Low Perm Hardwall 8.5’ Assembly Hose
CP12LP8.5SV: 3/4” Low Perm Hardwall 8.5’ Assembly Hose Swivel
CP12LP9: 3/4” Low Perm Hardwall 9’ Assembly Hose
CP12LP9SV: 3/4” Low Perm Hardwall 9’ Assembly Hose Swivel
Please contact your distributor for information on creating an EZ-Connect for this nozzle.
EZ-Connects for this product have not been configured.
Ready to exceed expectations? Find the nearest distributor to get started.