lookup ran yes
ZIP CODE: 63116
chosen distributor:
interest categories:
General Questions
Where To Buy
Customer Service
Home | Husky | Nozzles | X Nozzle
#659404N: Conventional, Pressure Activated
X Nozzle
¾" Unleaded Nozzle with Three Notch Hold Open Clip
Product Info
Specs / Construction
Automatic shut-off nozzle for full-service and self-service stations.
  • X E85 nozzle shuts off when the gas tank is full. shuts off, the gas tank is full, the lever is opened before the pump is turned on, or the leak detector has not completed its test cycle.
  • Stainless steel spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
  • StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
  • Aluminum body, spout, and internal parts are nickel plated to prevent contamination and corrosion from Ethanol blends.
  • New poppet seal design in conjunction with new tilt poppet design improves flow control (“to-the-penny” dispensing) and provides enhanced endurance over time.
  • Optional cold weather seals are rated to -40°F/C.
  • Optional Gilbarco, Tokheim, and Wayne handguards can be fitted with a magnet to trigger the dispenser’s proximity switch, or can be provided without the magnet for dispensers equipped with a standard “flapper” switch.
  • All seals are UL approved fluorocarbon compounds to prevent degradation from Ethanol blends.
  • Compatible with unleaded and all Ethanol blends through E-85.
  • Comes standard with smooth full grip guard.

Body: Nickel-plated die cast aluminum with high-impact polymer handguard
Seals: Fluorocarbon
Packing: Double o-ring seal protected by fiber reinforced Teflon®
Lever: One piece polymer
Inlet: ¾” / 19 mm NPT

Flow Rate
X, XS E85 E25 nozzle dimension image
Configure a Complete Fueling System
Choose any options that are applicable. If you would prefer a complete pump-to-car hanging hardware assembly that is certified, pre-assembled, pressure and continuity tested hanging hardware, select the “Make it an EZ-Connect®” tab to configure your EZ-Connect®.
Add Accessories / Options
Make it an EZ-Connect®
Choose a Swivel
Choose …
006350: ¾” M x ¾” F Multi-plane E85 Swivel, Not Listed
Choose a Safe-T-Break®
Choose …
006273: ¾” F x ¾” F Non-Reconnectable E25/E85 Safe-T-Break®
006360: ¾” F x ¾” F Reconnectable E85 Safe-T-Break®, Not Listed006207
Choose Spout
Choose …
006207: Unleaded E85 Spout Assembly
Choose Pressure/Vacuum Vent
Choose …
004620: 2” Slip-On Pressure Vacuum Vent
004885: 2” Thread-On Pressure Vacuum Vent - NPT
005885: 2” Thread-On Pressure Vacuum Vent with Internal Screen - NPT
Choose Accessories, Testing and Maintenance
Choose …
000397: Unleaded Spout Gauge
003593: Hold Open Clip Kit
007089: Nozzle Service Kit
007490: Internal Flo-Equalizer® - 10 gpm / 37.9 Lpm
Choose Guards
Choose …
001506: Protection Package
001806: Full Grip Reguard
001808-1: Waffle Splash Guard with Small Hole
001808: Waffle Splash Guard
001809: Reguard Protection Package
003440: Mate Easy-on Package
003795: Mate Guard
004145: Full Grip Guard
006628: POPD® S Clear Cover
006665: POPD® S Full Grip Guard
007205: POPD® S Full Grip Reguard
007361: Black Handle Cover
007999: POPD® H Clear Cover
008165: POPD® S Mate Guard
008166: POPD® H Mate Guard
008175: POPD® EZS Nozzle Guard
008176: POPD® EZH Nozzle Guard
008185: POPD® H Full Grip Guard
008192: POPD® H Full Grip Reguard
014524: International Mate Package
014530: International Mate Guard
015247: International POPD® H Mate Guard
015253: International POPD® H Mate Package
Please contact your distributor for information on creating an EZ-Connect for this nozzle.
EZ-Connects for this product have not been configured.
Ready to exceed expectations? Find the nearest distributor to get started.