lookup ran yes
ZIP CODE: 63116
chosen distributor:
interest categories:
General Questions
Where To Buy
Customer Service
Home | Husky | Nozzles | XS® Nozzle
#159560: Conventional, Pressure Activated
XS® Nozzle
1" Light Duty Diesel Nozzle with Three Notch Hold Open Clip and Waffle Splash Guard
Product Info
Specs / Construction
Pressure activated, automatic shut-off nozzle for full-service and self-service stations.
  • Husky XS® nozzle shuts off when: the pump shuts off, the gas tank is full, the lever is opened before the pump is turned on, or the leak detector has not completed its test cycle.
  • Stainless steel spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
  • StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
  • Comes standard with smooth full grip guard.

Body: One piece die cast aluminum
Seals: Fluorocarbon
Packing: Double o-ring seal protected by fiber reinforced Teflon®
Lever: One piece contoured steel with hard plastic cover
Inlet: 1" / 25.4mm NPT

Flow Rate
Configure a Complete Fueling System
Choose any options that are applicable. If you would prefer a complete pump-to-car hanging hardware assembly that is certified, pre-assembled, pressure and continuity tested hanging hardware, select the “Make it an EZ-Connect®” tab to configure your EZ-Connect®.
Add Accessories / Options
Make it an EZ-Connect®
Choose a Swivel
Choose …
000087: 1” M x 1” F NPT Multi-Plane Swivel
004860: 1” M x 1” F NPT Multi-Plane High Flow Swivel
000095: 1” M x 1” F NPT 70° Pump Swivel
Choose a Safe-T-Break®
Choose …
002276: 1” F x 1” F NPT Reconnectable Safe-T-Break®
005812: 1” F x 1” F NPT Non-Reconnectable Safe-T-Break®
006301: 1” F x 1” F NPT Non-Reconnectable PCC Safe-T-Break®
Choose Swivel/STB Combo
Choose …
005969: 1” M NPT Multi-Plane Swivel connected to 1” F NPT Reconnectable Safe-T-Break®
Choose Spout
Choose …
001473: Unleaded Spout without Flo-Stop®
010434: Unleaded Long Spout without Flo-Stop®
001471: Light Duty Diesel Spout without Flo-Stop® with StreamShaper®
010353: Light Duty Diesel Long Spout without Flo-Stop®
Choose Pressure/Vacuum Vent
Choose …
Choose Accessories, Testing and Maintenance
Choose …
003593: Hold Open Clip Kit
000397: Unleaded Spout Gauge
000385: 1” M x ¾” F Reducer Bushing
Choose Guards
Choose …
004145: Full Grip Guard
001806: Full Grip Reguard
005494: Lever Guard
008176: POPD® EZH Nozzle Guard
008175: POPD® EZS Nozzle Guard
007999: POPD® H Clear Cover
008185: POPD® H Full Grip Guard
008192: POPD® H Full Grip Reguard
008166: POPD® H Mate Guard
006628: POPD® S Clear Cover
006665: POPD® S Full Grip Guard
007205: POPD® S Full Grip Reguard
008165: POPD® S Mate Guard
001506: Protection Package
001809: Reguard Protection Package
001808: Waffle Splash Guard
Specify the components you’ll need, and we’ll create the perfect EZ-Connect for you. Note that all components must be chosen to complete an EZ-Connect System.
Choose a Swivel
Choose …
NSVL: No Swivel
Choose a Safe-T-Break®
Choose …
008331: MAGBREAK® 1” F NPT CK
Choose a Whip Hose
Choose …
CP16WB.75: 1'' x 9'' Wirebraid Whip Hose
CP16WB.75L: 1'' x 9'' Wirebraid Whip Hose with Zinc Coupling
CP16WB04: 1'' x 4' Wirebraid Whip Hose
Choose a Curb Hose
Choose …
CP16WB09SVSV: 1" x 9' Wirebraid Curb Hose with Swivels on both ends
CP16WB09LSVSV: 1" x 9' Wirebraid Curb Hose with Zinc Coupling and Swivels on both ends
Ready to exceed expectations? Find the nearest distributor to get started.