Ethanol Fueling
Husky makes a wide variety of fuel-dispensing products that meet or exceed expectations for quality, safety and reliability.
Husky XS® E25 Cold Weather:
Pressure Activated Automatic Nozzle Pressure activated, automatic shut-off nozzle for full-service, self-service and unattended stations.
Pressure Activated Automatic Nozzle Pressure activated, automatic shut-off nozzle for full-service, self-service and unattended stations.
Loss motion latch pin, working in conjunction with the spring loaded diaphragm, greatly reduces clicking off & splash back spills.
Unique Flo-Stop® device shuts off when spout is raised above horizontal or falls from the fill pipe.
Delrin tipped stem reduces lever pad wear & allows more positive low flow shut off.
StreamShaper® reduces turbulence & velocity for better ORVR compatibility – straighter fuel flow & less splash back spillage.
- Husky® XS® E25 cold weather nozzle shuts off when:
— the pump shuts off.
— the gas tank is full.
— the lever is opened before the pump is turned on.
— the leak detector has not completed its test cycle. - StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
- Compatible with unleaded and all Ethanol blends through E-25.
- A reinforced stainless steel spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
- Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
- Nozzle comes with smooth full grip guard.
- All seals are UL approved fluorocarbon compounds to prevent deterioration from Ethanol blends.
- New poppet seal design improves flow control and provides enhanced endurance over time.
| Construction | |
|---|---|
| Body | One piece die cast aluminum |
| Seals | Fluorocarbon |
| Packing | Double o-ring seal protected by fiber reinforced Teflon® |
| Lever | One piece contoured polymer |
| Inlet | ¾” / 19 mm NPT |
