lookup ran yes
ZIP CODE: 63116
chosen distributor:
interest categories:
General Questions
Where To Buy
Customer Service
Home | Husky | Nozzles | XS® Nozzle
#6595179: Conventional, Pressure Activated
XS® Nozzle
3/4" Unleaded Nozzle with Single Notch Hold Open Clip and Waffle Splash Guard
Product Info
Specs / Construction
Pressure activated, automatic shut-off nozzle for full-service and self-service stations.
  • Husky XS® nozzle shuts off when: the pump shuts off, the gas tank is full, the lever is opened before the pump is turned on, or the leak detector has not completed its test cycle.
  • Stainless steel spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
  • Compatible with unleaded and all Ethanol blends through E-85.
  • Comes standard with smooth full grip guard.
  • A reinforced stainless steel spout bushing keeps the spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
  • All seals are UL approved fluorocarbon compounds to prevent deterioration from Ethanol blends.
  • New poppet seal design improves flow control and provides enhanced endurance over time.

Body: One piece die cast aluminum with Electroless Nickel Plating
Seals: Fluorocarbon
Packing: Double o-ring seal protected by fiber reinforced Teflon®
Lever: One piece contoured steel with hard plastic cover
Inlet: ¾” / 19 mm NPT

Flow Rate
Configure a Complete Fueling System
Choose any options that are applicable. If you would prefer a complete pump-to-car hanging hardware assembly that is certified, pre-assembled, pressure and continuity tested hanging hardware, select the “Make it an EZ-Connect®” tab to configure your EZ-Connect®.
Add Accessories / Options
Make it an EZ-Connect®
Choose a Swivel
Choose …
006350: ¾” M x ¾” F Multi-plane E85 Swivel, Not Listed
Choose a Safe-T-Break®
Choose …
006360: ¾” F x ¾” F Reconnectable E85 Safe-T-Break®, Not Listed006207
006273: ¾” F x ¾” F Non-Reconnectable E25/E85 Safe-T-Break®
Choose Spout
Choose …
006207: Unleaded E85 Spout Assembly
Choose Pressure/Vacuum Vent
Choose …
Choose Accessories, Testing and Maintenance
Choose …
003593: Hold Open Clip Kit
007490: Internal Flo-Equalizer® - 10 gpm / 37.9 Lpm
004951: Spout Nut
000397: Unleaded Spout Gauge
Choose Guards
Choose …
003376: Black Handle Guard
004145: Full Grip Guard
001806: Full Grip Reguard
005494: Lever Guard
003440: Mate Easy-on Package
003795: Mate Guard
006628: POPD® S Clear Cover
006665: POPD® S Full Grip Guard
007205: POPD® S Full Grip Reguard
007815: POPD® Mate Guard
001506: Protection Package
001809: Reguard Protection Package
001808: Waffle Splash Guard
Please contact your distributor for information on creating an EZ-Connect for this nozzle.
EZ-Connects for this product have not been configured.
Ready to exceed expectations? Find the nearest distributor to get started.